# Config file for qcam
# This is where qcam finds its defaults.

# Port should be defined, autodetection not supported
#
port 	0x378	# /dev/lp1, the first printer port
#port	0x278	# /dev/lp2, the second printer port

# Port type (bidirectional, unidirectional or unknown)
#
#porttype unknown
porttype bidirectional
#porttype unidirectional

# Camera direction (up, down, left or right)
#        O
#  __   _L     __        __
# (==) (==)   ([])-O  O-([])
#  ~F   ~~     ~~        ~~
#   O*
#  up  down   left    right
#
#direction down
#direction right
direction up
#direction left

# Image width (before scaling)
#

width 300
#4-27-99 width 200


#width 300
# last #width	200

#width 	160
#width 	80

# Image height (before scaling)
#

#height 200
#4-27-99 height 225
# last #height	250
#height 120
#height	80
height 240

# Offsets from top and left image edges, not CCD edges, like in qcam
# (keywords changed to avoid collision with qcam "top" and "left")
#
yoffset 0
xoffset 0

# Transfer scale (1, 2 or 4)
#
#transfer 1
#transfer 2
transfer 4

# Bits per pixel
#
#bpp 	4	# 16 shades of gray (B&W only)
bpp 	6	# 64 shades of gray (B&W only)
#bpp 	24	# 24-bit colors (color only)

# Brightness
#
#brightness 180
# was brightness 150
#4-28-99 brightness 100
#10-7-99 brightness 120
#brightness 150
brightness 150

# Contrast
#
#contrast 30
#4-28-99 contrast 40
contrast 30

# Black offset (B&W only)
#
#blackoffset 50
blackoffset 100


# Hue (blue gain, color only)
#
hue 128

# Saturation (color only)
#
saturation 255

# White level (color only)
#
white 70

# Black level (color only)
#
black 100
